In many applications gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. The design of the GAS 222.15-MA is particularly suited for marine applications. Heated probe with downstream filter The downstream filter can easily be removed by turning the handle 90°. Increased degree of protection (IP66) due to the specially developed silicone protective cover Particularly suitable for use in high-vibration applications (such as marine) due to special design features The probe body and the area around the screw connection for the heated sample gas line are completely insulated Self-regulating heater to approx. 180 °C with low temperature alarm. For dust loads up to 2 g/m³
